4.1.a Implement and troubleshoot MPLS operations

or the mpls ldp ID… roger perkin has  a nice article on this here…http://www.rogerperkin.co.uk/ccie/index.php/mpls/mpls-ldp-router-id-loopback0-force/  it is also discussed in DeGhein’s MPLS Fundamentals in chapter 4 the router id preference for ldp works like it does for ospf and bgp… the theory behind the value of using the loopback in all cases is well documented… pe1(config)#do […]

4.1.a Implement and troubleshoot MPLS operations

pe1(config)#ip vrf cust-a pe1(config-vrf)#rd 1:111 pe1(config-vrf)#route-target both 1:100 pe1(config-vrf)#do sh run | b ip vrf ip vrf cust-a rd 1:111 route-target export 1:100  route-target import 1:100 pe1(config-vrf)#int f0/0 pe1(config-if)#ip vrf forward cust-a % Interface FastEthernet0/0 IPv4 disabled and address(es) removed due to enabling VRF cust-a pe1(config-if)#ip add 192.168.15.1 255.255.255.0 pe1(config-if)#do sh run int f0/0 Building […]